This versatile H9 notebook is the upgraded version of the previous MUPO-H8 series. Now more powerful, with less consumption, higher performance and more respectful with the environment.

Very easy and fast to install with the possibility of using the air conditioner immediately. With discharge tube air to the outside. Also, dehumidification function to reduce humidity by restoring a temperature optimal in humid environments such as grow rooms.

It has a heat pump with a heating power of 2900W. Remote control and operation display fit window. It can be operated only in fan mode when it is not necessary to modify the room temperature.

Eliminates water from condensate, so in general it is not necessary to connect the equipment to a drain unless operate in dehumidifier mode in very humid environments.

The wireless remote control incorporates a temperature sensor, which allows you to configure the equipment in the function Follow Me (iFEEL). This means that with the knob we set the desired temperature and then it sends this signal to the equipment every 3 min, until the Follow Me button is pressed again

Technical Characteristics

• MODEL: MUPO-12-H9
• Refrigeration: Nominal capacity 3.5 kW
• PEER nominal consumption: 1.35 kW
• EERd: 2.6 W / W
• Energy Labeling: A
• QSD electricity consumption in cooling: 1.4 kWh / h
• QSD electricity consumption in heating: 1.1 kWh / h
• Power consumption in off mode by PTO thermostat: -
• Power consumption in standby mode PSE: 0.5 W
• Sound power level: 65 dB (A)
• Indoor air flow: 420/370/355 m3 / h
• Outdoor air flow: 535 m3 / h
• Diameter of the air discharge tube: 150 mm
• Refrigerant: R290
• Weight: 34.4 kg