Novatec Indoor Temperature and Humidity Controller, the definitive system to regulate both key parameters for your crop with a single device. A complete climate control system, with programmable thermostat and humidistat, on a digital console that permanently indicates the temperature and humidity of your grow room.
With the Novatec Indoor Temperature and Humidity Controller you can automate your air conditioning equipment to maintain the best conditions in your cultivation. If the temperature is lower than desired, the controller connects a heater, and disconnects it when the programmed temperature is reached. If the humidity is lower than desired, connect a humidifier, and if it is higher connect a dehumidifier.
The thermostat of the appliance has a temperature probe with two relay outputs that we use in this case to start up:
The humidistat has a humidity probe with two relay outputs that we use in this case to start up a humidifier and a dehumidifier, with a maximum overall power of 3000W.
The panel is equipped with protection by magnetothermic and contactor, display with permanent digital reading of humidity and temperature. Five outlets with recessed plugs for the humidifier, dehumidifier, extractor, intractor and heater.
40 x 35 x 20 cm
- The power is divided into:
A 16 amp circuit breaker for the extractors-intractors / heater.
A 16 amp circuit breaker for the humidifier-dehumidifier.
- Includes ground connection.
- Includes contactors and protection and maneuvering relays.
- All materials are approved by the EU and meet the quality and safety requirements for this type of facility.