Click on the image to enlarge it
Cli-mate Twin Controller (24Amp)
With Cli-mate Twin Controller (24 Amp), you can control your ventilation devices to maintain temperature indoors, as well as maintaining the negative pressure of the grow room.
CLI-MATE® devices are exclusively intended for the control of fans or extraction systems (such as professional kitchens), or as a component in an air treatment system.
All electronic chips required for operation are industrially configured and integrated in an IP44 protection casing. It also has a plate on the back that facilitates assembly and installation. appliance cooling.
In your case, the Cli-mate Twin Controller (24Amp) allows two settings for the minimum operating speed of the extractors (IN & OUT), in order to maintain the set internal temperature and negative pressure.
Installation
- Try to always install the controller outside the area under control, so that it is in an environment that favor its cooling.
- The CLI-MATE® controller must be connected following valid guidelines set by the electrical society, and to an outlet that supplies sufficient electrical current.
- Avoid placing the controller in a location highly exposed to intense heat and humidity levels.
- Try, above all, not to place it next to a source of heat (stoves, spotlights), or moisture (humidifier).
Features
- Inlet and outlet air control with independent settings.
- Fully adjustable, automatic temperature control.
- Easy to calibrate with the buttons.
- Voltage 220/230V
- Amperage 24 (12+12) A
- Includes rear mounting plate.
- Incorporates temperature sensor.
- Temperature range: 5-55ºC
- Differential: 1ºC at each step
- Protection type: IP44
- Dimensions: 140x220x110 mm
Note: NEVER exceed the maximum allowable load (AC motors)