Click on the image to enlarge it
Milwaukee Liquid Calibrator EC 12880
Milwaukee brand EC 12880 Calibrator Liquid in 230 milliliter sachets to carry out the calibration of digital EC (Electro conductivity) meters. Valid for basic digital meters, continuous meters, monitors and controllers. Note: If the Milwaukee brand is not available, a similar one will be supplied.
To buy a 20ml box add 25 units.
Milwaukee Instruments provides you with a wide range of calibration, storage and cleaning fluids.
Liquids are served in 2 formats: 230ml bottle or 20ml sachet.
The use of calibration, cleaning and storage fluids is essential for the proper use of your meters.
In addition to good use, the electrode also benefits by having a longer service life and working more efficiently.
The 20ml sachets (such as the buffer over 20ml pH7.01 calibrator) are for single use only. The envelopes are sold individually or per box of 25 units.
To calibrate with the EC12880 calibrator buffer 230ml bottle, pour up to 1cm of calibrator liquid into a glass.
Turn on the meter, put the tip of the probe or electrode in the beaker.
Then proceed with its calibration:
Calibration can be manual or automatic.
In case of manual calibration with the EC12880 230ml bottle, turn on your meter, put the meter or the electrode inside the beaker, shake lightly to facilitate the meter reading of the buffer, and, with the help of the calibration screwdriver or of the calibration wheel (depending on the model) adjust the data on your screen to the data indicated in the buffer.
In case of automatic calibration with the EC12880 calibrator buffer 230ml bottle, follow the instructions in the manual of your meter. The way to calibrate will depend on each type of meter.