Milwaukee
Milwaukee Redox Power Meter (ORP) (MW500)
PHEC0140
The Redox ORP meter MW500 measures the REDOX ORP potential
▒ 1000 mV range
Resolution: 1mV -
The ORP MW500 Redox meter is supplied with an ORP electrode (SE300) with 1 meter cable, BNC connector
The ORP MW500 Redox meter is supplied with a 9V battery (autonomy of 300 hours), a SE300 probe.
Factory calibrated MW500 ORP Redox meter. You can check your calibration with the MA9020 - 200 - 275 mV buffer. The portable meter is ideal for field measurements.
This MW500 ORP Redox meter is ideal for aquariums, fish farming, laboratory, education.
To keep the electrode in optimal condition, it is advisable to put a few drops of ORP storage liquid inside its cap (ref: MA9015)
Redox is a measurement method for water quality. It informs us about the oxidation / reduction potential of water.
Aquariums: In fresh water, from 250mV are considered good values.
Sea water values range from 350 to 400mV.
Pools: The value necessary to eliminate certain bacteria is 700mV
Waste water: Redox measurement is used mainly in the detoxification of waste water, with the reduction of chromate or the oxidation of cyanide.
The Redox ORP meter MW500 measures the REDOX ORP potential
▒ 1000 mV range
Resolution: 1mV -
The ORP MW500 Redox meter is supplied with an ORP electrode (SE300) with 1 meter cable, BNC connector
The ORP MW500 Redox meter is supplied with a 9V battery (autonomy of 300 hours), a SE300 probe.
Factory calibrated MW500 ORP Redox meter. You can check your calibration with the MA9020 - 200 - 275 mV buffer. The portable meter is ideal for field measurements.
This MW500 ORP Redox meter is ideal for aquariums, fish farming, laboratory, education.
To keep the electrode in an optimal situation, it is advisable to put a few drops of ORP storage liquid inside its cap (ref: MA9015)
Redox is a measurement method for water quality.
It informs us about the oxidation / reduction potential of water.
Aquariums: In fresh water, from 250mV are considered good values.
Sea water values range from 350 to 400mV.
Pools: The value necessary to eliminate certain bacteria is 700mV
Waste water: Redox measurement is used mainly in the detoxification of waste water, with the reduction of chromate or the oxidation of cyanide.
