Aquaking water pumps are also ideal for draining flat surfaces flooded with clear water or slightly dirty with particles no larger than 5 mm, in places such as basements, swimming pools and the like. Its powerful but economical motors will raise the water in the flooded area to exceed 8 meters in height if necessary, with a consumption, in this case, of only 550W. In these types of situations, although the pump needs at least 8 cm of water level to start its activation, the equipment pumps at ground level until only half a centimeter of water remains. A practical non-return valve integrated in the system makes it impossible for the pipes to empty once the pumping is finished, thus reducing the suction time when repeating the operation.

Its waterproof plastic housing is resistant to depths of up to seven meters and is capable of withstanding long periods of operation. In any case, the Aquaking pumps are equipped with thermal overheating protection that will disconnect the device if necessary and with protection against dry running. Equipped with a resistant ergonomic handle that facilitates the transport and handling of the device in its different applications.

Aquaking connections are universal and allow easy coupling with other pipe connections. Thanks to its angle adapter, the hoses and tubes can be extended parallel to the ground or, on the contrary, completely perpendicular to it.

In addition, depending on the model, the Aquaking pump is equipped with a float switch that allows automatic connection and disconnection of the equipment. Depending on the level height desired by the user, the appliance is automatically switched on and off. But manual operation in low water is achieved by simply positioning the float switch in its continuous horizontal operating position.

Available models